del.icio.us
Digg
Facebook
MySpace
Windows Live
Yahoo! My Web
Blinklist
Blogmarks
Furl
Google Bookmarks
ma.gnolia
Newsvine
reddit
Spurl
StumbleUpon
Tailrank
Technorati
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707
Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707
Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707
Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707
Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
1:32pm April 1st, 2009 By nudekim
Korea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,
Work: 1-404-201-2707Email: kffc@paran.com
IM: zephyrarchangel (AIM)
http://www.linkedin.com/in/zephyrarchangelGoogle and MySpace Blogger 대한 소방 공사
Bang Bang Cross Road
YokSam-Dong
KangNam-Ku, Seoul 135-080 Korea, South
We're hiring!
누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in commonDo you know "Zephyr Archangel(대한 소방 공사 대표 짐승?
Google Friend Connect for SuxKim
TECHNYL® 2413GW9 WHT
Product Datasheet – October 2007
Description
Polyamide 66, UL94 V-0 flame retarded, 45% of glass fiber for injection molding.
Applications
TECHNYL 2413GW9 WHT is used in all sectors of industry, offering high mechanical strength, flame retarded & especially low gas property.
This grade is widely used for
- Connector, Coil Bobbin, Magnetic Switch, Socket, Battery Insulator
This product is available in White color (Other colors will be discussed)
Processing
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0.2% with a dehumidified air drying equipment at approx. 80°C
Recommended moulding conditions :
-Barrel temperatures : - feed zone 275~285°C
- compression zone 280~290°C
- front zone 285~295°C
-Mould temperatures 80~100°C
For more detailed information, please refer to the technical shet " Injection moulding ".
Safety
Before use, Please refer the Safety Data Sheet 2413GW9 WHT.
CHALLENGING BOUNDARIES
TECHNYL® 2413GW9 WHT
The values of properties are for white color grade.
Properties
Standards
Unit
Values
d.a.m*.
Cond.**
Physical
Water absorption, 24h in water at 23°C
ISO 62
%
Density
ISO 1183
g/㎤
1.72
Mold shrinkage (Flow)
Rhodia
%
0.1~0.4
Mold shrinkage (Transverse)
Rhodia
%
0.2~0.5
Mechanical
Tensile stress at yield
ASTM D-638
MPa
1,970
Tensile strain at break
ASTM D-638
%
2
Flexural strength
ASTM D-790
MPa
2,970
Flexural Modulus
ASTM D-790
MPa
136,000
Izod notched impact strength
ASTM D-256
J/m
16
Rockwell hardness
ASTM D-786
R-scale
121
Thermal
Melt Temperature
ISO 11357
262℃
Heat Deflection Temperature, 1.82 MPa
ASTM D-648 +261℃
Heat Deflection Temperature, 0.45 MPa
ASTM D-648
℃
251
Coef. of Linear thermal expension normal or perpendicular ( 23°C to 85°C)
ISO 11359
E-5/℃
-
Flammability
UL94
-
V-0
Electrical
Dielectric strength
IEC60243
kV/mm
Dissipation factor
IEC60250
-
Volume resistivity
IEC60093
E14.ohm.cm
Surface resistivity
IEC60093
E14.ohm
Comparative tracking index sol. A
IEC 60112
Volt
Comparative tracking index sol. B
IEC 60112
Volt
Identification code > PA66-GF45 FR <
The information contained in this document is supplied in good faith. It is based on the extent of our knowledge of the products as listed, and on the tests and experiments carried out in our laboratories. It is to be used only as an indication and shall not be construed in any way as a formal
commitment or warranty on our part. Compliance of our products with your conditions of application or use can only be determined pursuant to your own prior appropriate test. The listed values of properties are for natural grade, if not otherwise specified. * d.a.m = Dry As Moulded. ** Cond. = conditioned according ISO 1110.
3rd F/L, Kangnam Bldg., 1321-1, Seocho-Dong, Seocho-Gu, Seoul, 137-
070 KOREA
Telephone: +82 (2) 2186 2500 Fax: +82 (2) 3474 7363
Tags: rhodia, pa66, polyamide, pc, polycarbonate, engineering, plastic, ep, , , ,
No comments | Leave a comment
Older »